Hot Forging Titanium Flat Bar Diameter 38mm ASTM B348 Grade 7 Light Weight

Material: GR1 GR2 Gr5 GR7 GR9 (Ti-3AL-2.5V)

Standard : ASTM B348 ASTM B337 ASTM B862 ASTM B861

Density: 4.51g/cm3

Size: OD 1 to 120mm, Length at customers’ requirement

Titanium Rod, Titanium Bar, Pure Titanium Bar, CP Titanium Bar, Medical Use Titanium Rod

Certificate: ISO 9001, SGS report, Material, and test report.

2. Product Picture

3. Quality Control

4. Related products

Baoji Lihua Non-ferrous Metals Co., Ltd.

As a leading manufacturer of titanium products for over 15 years, we supply a series of high-performance products for titanium products, including titanium flange, titanium bar, and titanium wire, etc.

If you'd like to know more about our products, please feel free to contact me.
Your early reply will be highly appreciated.

The package of titanium bar

5.  Titanium rod executive standard

Titanium rod executive standard
National standard: GB / T2965-2007, GB / T13810, Q / BS5331-91
American Standard: ASTM B348, ASTM F136, ASTM F67, AMS4928

1. Reference Standard of the titanium rod
1): GB 228 metal tensile test method
2): GB / T 3620.1 titanium and titanium alloy grades and chemical composition
3): GB / T3620.2 titanium and titanium alloy processed products chemical composition and composition tolerance
4): GB 4698 sponge titanium, titanium, and titanium alloy chemical analysis method.

2.  The technical requirements of the Titanium rod

1): The chemical composition of titanium and titanium alloy bars shall comply with the provisions of GB / T 3620.1, and when the repeated inspection is required, the allowable deviation of the chemical composition shall comply with the provisions of GB / T 3620.2.
2): The diameter or side length of the hot-processed bar and its allowable deviation should meet the requirements of Table 1.
3): After hot working, the diameter of the cold-drawn bar and the cold-rolled bar (ground) and cold-rolled bar should be in accordance with the requirements of Table 2.
4): The out-of-roundness of the bar after turning (grinding) after hot processing should not be greater than half of its dimensional tolerance.
5): The length of the indeterminate length of the processed bar is 300-6000mm, and the length of the annealed bar is 300-2000mm. The length of the fixed-length or multiple lengths should be within the length of the indefinite length. The allowable deviation of the fixed-length is + 20mm; The length of the double ruler should also be included in the cut amount of the bar, each cut amount is 5mm. The fixed ruler or double ruler length should be indicated in the contract.

1. Any discount?

A: The prices we quote are all wholesale prices in the first place. Meanwhile, our best price will be offered according to your order quantity, so please specify your purchase quantity when you inquire. The more your order, the better discounts we will offer.

2. Are you a manufacturer?

A: Yes. As a manufacturer with 13 years of experience, we’ve gained adequate expertise and proficiency. Relying on our own factory, we offer you our best quality products as we have fully equipped the Product Department and QC Department.

3. How do I know if my products are delivered?

A: We will inform you Tracking No. for your reference or you can contact us anytime for shipment information.

4. Has your company acquired any certificate?

A: We are a certified manufacturer with our auto parts approved by the ISO9001 Quality Management System.

5. How about the quality of the products?

A: We guarantee strict control over every detail of the products. Each product is carefully inspected and tested before delivery.

6. What about payment terms?

A: T/T, L/C, Western Union Paypal are accepted.

7. How is your MOQ?

A: The minimum quantity for certain items is only 20pcs. But MOQ can be lowered when you buy several different kinds of products together. For more details, please feel free to contact us at any time.

8. How about the delivery time?

A: Usually within 5-7 days via express delivery. But it depends on your order quantity as well.

7. Quality assurance

1. According to globally recognized standards, such as ASTM, AMS, ASME Provide third-party inspection reports. ISO Quality Management System.

2. Visual inspection to check the surface quality, ensuring without flaw, black dot andy any other defects.

3. Chemical Composition making sure all chemical components satisfy customer's demands.

4. Mechanical property testing making sure all titanium products have satisfying mechanical features before delivery.